Tablet CLEAN ALUMINUM LITHOGRAPHIC SHEETS
To consist of 1000 and/or 3000 series alloys, to be
free of paper, plastic, excessively inked sheets, and
any other ontaminants. Minimum size of 3” (8 cm)
in any direction.
Tabloid NEW, CLEAN ALUMINUM LITHOGRAPHIC SHEETS
To consist of 1000 and/or 3000 series alloys,
uncoated, unpainted, to be free of paper, plastic, ink,
and any other contaminants. Minimum size of 3” (8
cm) in any direction.
Taboo MIXED LOW COPPER ALUMINUM CLIPPINGS AND SOLIDS
Shall consist of new, clean, uncoated and unpainted
low copper aluminum scrap of two or more alloys
with a minimum thickness of 0.015 inches (.38 mm)
and to be free of 2000 and 7000 series, hair wire,
wire screen, punchings less 1/2 inch (1.25 cm) diameter,
dirt, and other non-metallic items. Grease and
oil not to total more than 1%. Variations to this specification
should be agreed upon prior to shipment
between the buyer and seller.
Taint/ CLEAN MIXED OLD ALLOY SHEET ALUMINUM
Tabor Shall consist of clean old alloy aluminum sheet of
two or more alloys, free of foil, venetian blinds,
castings, hair wire, screen wire, food or beverage
containers, radiator shells, airplane sheet, bottle
caps, plastic, dirt, and other non-metallic items.
Oil and grease not to total more than 1%. Up to 10%
Tale permitted.
Take NEW ALUMINUM CAN STOCK
Shall consist of new low copper aluminum can
stock and clippings, clean, lithographed or not lithographed,
and coated with clear lacquer but free of
lids with sealers, iron, dirt and other foreign contamination.
Oil not to exceed 1%.
Talc POST-CONSUMER ALUMINUM CAN SCRAP
Shall consist of old aluminum food and/or beverage
cans. The material is to be free of other scrap metals,
foil, tin cans, plastic bottles, paper, glass, and other
non-metallic items. Variations to this specification
should be agreed upon prior to shipment between the
buyer and seller.
Talcred SHREDDED ALUMINUM USED BEVERAGE CAN (UBC) SCRAP
Shall have a density of 12 to 17 pounds per cubic
foot (193 to 273 kg/m3). Material should contain
maximum 5% fines less than 4 mesh (U.S. standard
screen size) (6.35 mm). Must be magnetically separated
material and free of steel, lead, bottle caps,
plastic cans and other plastics, glass, wood, dirt,
grease, trash, and other foreign substances. Any
free lead is basis for rejection. Any and all aluminum
items, other than used beverage cans, are not
acceptable. Variations to this specification should
be agreed upon prior to shipment between the seller
and buyer.
Taldack DENSIFIED ALUMINUM USED BEVERAGE CAN (UBC) SCRAP
Shall have a biscuit density of 35 to 50 pounds per
cubic foot (562 to 802 kg/m3). Each biscuit not to
exceed 60 pounds (27.2 kg). Nominal biscuit size
range from 10” to 13” x 101/4” (25.4 x 33 x 26 cm) to
20” x 61/4” x 9” (50.8 x 15.9 x 22.9 cm). Shall have
banding slots in both directions to facilitate bundle
banding. All biscuits comprising a bundle must be of
uniform size. Size: Bundle range dimensions acceptable
are 41” to 44” x 51” (104 to 112 cm) to 54” x
54” (137 x 137 cm) to 56” (142 cm) high. The only
acceptable tying method shall be as follows: Using
minimum 5/8” (1.6 cm) wide by .020” (.05 cm) thick
steel straps, the bundles are to be banded with one
vertical band per row and a minimum of two firth
(horizontal) bands per bundle. Use of skids and/or
support sheets of any material is not acceptable.
Must be magnetically separated material and free of
steel, lead, bottle caps, plastic cans and other plastic,
glass, wood, dirt, grease, trash, and other foreign
substances. Any free lead is basis for rejection. Any
and all aluminum items, other than used beverage
cans, are not acceptable. Items not covered in the
specifications, including moisture, and any variations
to this specification should be agreed upon prior to
shipment between the seller and buyer.
Taldon BALED ALUMINUM USED BEVERAGE CAN (UBC) SCRAP
Shall have a minimum density of 14 pounds per cubic
foot (225 kg/m3), and a maximum density of 17
pounds per cubic foot (273 kg/m3) for unflattened
UBC and 22 pounds per cubic foot (353 kg/m3) for
flattened UBC. Size: Minimum 30 cubic feet (.85 m3),
with bale range dimensions of 24” to 40” (61 to 132
cm) by 30” to 52” (76 to 132 cm) by 40” to 84”(102
to 213 cm). The only acceptable tying method shall
be as follows: four to six 5/8” (1.6 cm) x .020” (5
mm) steel bands, or six to ten #13 gauge steel
wires (aluminum bands or wires are acceptable in
equivalent strength and number). Use of skids and/
or support sheets of any material is not acceptable.
Must be magnetically separated material and free of
steel, lead, bottle caps, plastic cans and other plastic,
glass, wood, dirt, grease, trash, and other foreign
substances. Any free lead is basis for rejection. Any
and all aluminum items, other than used beverage
cans, are not acceptable. Variations to this specification
should be agreed upon prior to shipment
between the buyer and seller.
Taldork BRIQUETUED ALUMINUM USED BEVERAGE CAN (UBC) SCRAP
Shall have a briquette density of 50 pounds per
size shall range from 12” to 24” (30.5 x 61 cm) x
12” to 24” (30.5 x 61 cm) in uniform profile with a
variable length of 8” (20.3 cm) minimum and 48”
(122 cm) maximum. Briquettes shall be bundled or
stacked on skids and secured with a minimum of one
vertical band per row and a minimum of one girth
band per horizontal layer. Briquettes not to overhang
pallet. Total package height shall be 48 (122
cm) maximum. Banding shall be at least 5/8” (1.6
cm) wide by .020” (5 mm) thick steel strapping or
equivalent strength. The weight of any bundle shall
not exceed 4,000 pounds (1.814 mt). Material must
be magnetically separated and free of steel, plastic,
glass, dirt and all other foreign substances. Any and
all aluminum items other than UBC are unacceptable.
Any free lead is basis for rejection. Items not
covered in the specification, including moisture,
and any variations to this specification should be
and seller.
Tale PAINTED SIDING
Shall consist of clean, low copper aluminum siding
scrap, painted one or two sides, free of plastic coating,
iron, dirt, corrosion, fiber, foam, or fiberglass
backing or other non-metallic items.
Talk ALUMINUM COPPER RADIATORS
Shall consist of clean aluminum and copper radiators,
and/or aluminum fins on copper tubing, free of
brass tubing, iron and other foreign contamination.
Tall E.C. ALUMINUM NODULES
Shall consist of clean E.C. aluminum, chopped or
shredded, free of screening, hair-wire, iron, copper,
insulation and other non-metallic items. Must be free
of minus 20 mesh material. Must contain 99.45% aluminum
content.
Tally All Aluminum Radiators from Automobiles
Shall consist of clean aluminum radiators and/or
condensers. Should be free of all other types of radiators.
All contaminants including iron, plastic, and
foam not to exceed 1% of weight. Any deviation to
this specification, including oxidation and aluminum
content, to be negotiated between buyer and seller.
Talon NEW PURE ALUMINUM WIRE AND CABLE
Shall consist of new, clean, unalloyed aluminum wire
or cable free from hair wire, ACSR, wire screen, iron,
insulation and other non-metallic items.
Tann NEW MIXED ALUMINUM WIRE AND CABLE
Shall consist of new, clean, unalloyed aluminum wire
or cable which may contain up to 10% 6000 series
wire and cable free from hair wire, wire screen, iron,
insulation and other non-metallic items.
Tarry A CLEAN ALUMINUM PISTONS
Shall consist of clean aluminum pistons to be free
from struts, bushings, shafts, iron rings and nonmetallic
items. Oil and grease not to exceed 2%.
Tarry B CLEAN ALUMINUM PISTONS WITH STRUTS
Shall consist of clean whole aluminum pistons with
struts. Material is to be free from bushings, shafts, iron
and non-metallic items . Oil and grease not to exceed
2%.
Tarry C IRONY ALUMINUM PISTONS
Shall consist of aluminum pistons with non-aluminum
attachments to be sold on a recovery basis or
by special arrangement between buyer and seller.
Tassel OLD MIXED ALUMINUM WIRE AND CABLE
Shall consist of old, unalloyed aluminum wire and
cable which may contain up to 10% 6000 series wire
and cable with not over 1% free oxide or dirt and free
from hair wire, wire screen, iron, insulation and other
non-metallic items.
Taste OLD PURE ALUMINUM WIRE AND CABLE
Shall consist of old, unalloyed aluminum wire and
cable containing not over 1% free oxide or dirt and
free from hair wire, wire screen, iron, insulation and
other non-metallic items.
Tata NEW PRODUCTION ALUMINUM EXTRUSIONS
Shall consist of one alloy (typically 6063). Material
may contain “butt ends” from the extrusion process
but must be free of any foreign contamination.
Anodized material is acceptable. Painted material
or alloys other than 6063 must be agreed upon by
buyer and seller.
Toto ALUMINUM EXTRUSIONS “10/10”
Material to consist of new production and old/used
6063 extrusions that may contain up to (but not
exceed) 10 percent painted extrusions and 10 percent
6061 alloy extrusions. Must not contain other
alloys of aluminum. Material should be free of zinc
corners, iron attachments, felt, plastic, paper, cardboard,
thermo break, and dirt and other contaminants.
Tutu ALUMINUM EXTRUSION DEALER GRADE
Shall consist of old extruded aluminum of one
alloy, typically alloy 6063, 6061, or 7075. Material
must be free of iron, thermo break, saw chips, zinc
corners, dirt, paper, cardboard, and other foreign
contamination. Percentages of paint or other
alloys to be agreed upon by buyer and seller.
Teens SEGREGATED ALUMINUM BORINGS AND TURNINGS
Shall consist of aluminum borings and turnings of
one specified alloy. Material should be free of oxidation,
dirt, free iron, stainless steel, magnesium, oil,
flammable liquids, moisture and other non-metallic
items. Fines should not exceed 3% through a 20
mesh (U.S. standard) screen.
Telic MIXED ALUMINUM BORINGS AND TURNINGS
Shall consist of clean, uncorroded aluminum borings
and turnings of two or more alloys and subject to
deductions for fines in excess of 3% through a 20
mesh screen and dirt, free iron, oil, moisture and all
other non-metallic items. Material containing iron in
excess of 10% and/or free magnesium or stainless
steel or containing highly flammable cutting compounds
will not constitute good delivery. To avoid
dispute, material should be sold on basis of definite
maximum zinc, tin and magnesium content.
Tense MIXED ALUMINUM CASTINGS
Shall consist of all clean aluminum castings which
may contain auto and airplane castings but no
ingots, and to be free of iron, brass, dirt and other
non-metallic items. Oil and grease not to total more
than 2%.
Tepid AIRCRAFT SHEET ALUMINUM
Should be sold on recovery basis or by special
arrangements with purchaser.
Terse NEW ALUMINUM FOIL
Shall consist of clean, new, pure, uncoated 1000
and/or 3000 and/or 8000 series alloy aluminum
foil, free from anodized foil, radar foil and chaff,
paper, plastics, or any other non-metallic items.
Hydraulically briquetted material and other alloys by
agreement between buyer and seller.
Tesla POST CONSUMER ALUMINUM FOIL
Shall consist of baled old household aluminum foil
and formed foil containers of uncoated 1000, 3000
and 8000 series aluminum alloy. Material may be
anodized and contain a maximum of 5% organic
residue. Material must be free from radar chaff foil,
chemically etched foil, laminated foils, iron, paper,
plastic and other non-metallic contaminants.
Tetra NEW COATED ALUMINUM FOIL
Shall consist of new aluminum foil coated or laminated
with ink, lacquers, paper, or plastic. Material
shall be clean, dry, free of loose plastic, PVC and
other non-metallic items. This foil is sold on a metal
content basis or by sample as agreed between buyer
and seller.
Thigh ALUMINUM GRINDINGS
Should be sold on recovery basis or by special
arrangements with purchaser.
Thirl ALUMINUM DROSSES, SPATTERS, SPILLINGS, SKIMMINGS AND SWEEPINGS
Should be sold on recovery basis or by special
arrangements with purchaser.
Throb SWEATED ALUMINUM
Shall consist of aluminum scrap which has been
sweated or melted into a form or shape such as an
ingot, sow or slab for convenience in shipping; to
be free from corrosion, dross or any non-aluminum
inclusions. Should be sold subject to sample or
analysis.
Tooth SEGREGATED NEW ALUMINUM ALLOY CLIPPINGS AND SOLIDS
Shall consist of new, clean, uncoated and unpainted
aluminum scrap of one specified aluminum alloy
with a minimum thickness of .015” (.38 mm) and to
be free of hair wire, wire screen, dirt and other nonmetallic
items. Oil and grease not to total more than
1%. Also free from punchings less than 1/2” (1.27 cm)
in size.
Tough MIXED NEW ALUMINUM ALLOY CLIPPINGS AND SOLIDS
Shall consist of new, clean, uncoated and unpainted
aluminum scrap of two or more alloys with a minimum
thickness of .015” (.38 mm) and to be free of
hair wire, wire screen, dirt and other non-metallic
items. Oil and grease not to total more than 1%. Also
free from punchings less than 1/2” (1.27 cm) in size.
Tread SEGREGATED NEW ALUMINUM CASTINGS, FORGINGS AND EXTRUSIONS
Shall consist of new, clean, uncoated aluminum castings,
forgings, and extrusions of one specified alloy
only and to be free from sawings, stainless steel,
zinc, iron, dirt, oil, grease and other non-metallic
items.
Troma Aluminum Auto or Truck Wheels
Shall consist of clean, single-piece, unplated aluminum
wheels of a single specified alloy, free of
all inserts, steel, wheel weights, valve stems, tires,
grease and oil and other non-metallic items. Variations
to this specification should be agreed upon
prior to shipment between the buyer and seller.
Trump ALUMINUM AUTO CASTINGS
Shall consist of all clean automobile aluminum castings
of sufficient size to be readily identified and
to be free from iron, dirt, brass, bushings, and nonmetallic
items. Oil and grease not to total more than
2%.
Twang INSULATED ALUMINUM WIRE SCRAP
Shall consist of aluminum wire scrap with various
types of insulation. To be sold on a sample or recovery
basis, subject to arrangement between buyer and
seller.
Twirl FRAGMENTIZER AIRCRAFT ALUMINUM SCRAP (2000 and 7000 series)
The material as received must be dry and not to contain
more than 2% free zinc, 1% maximum free magnesium,
and 1.5% maximum free iron and stainless
with a maximum of 2% analytical iron. Not to contain
more than a total 5% maximum of non-metallics, of
which no more than 1% shall be rubber and plastics.
To be free of excessively oxidized material. Any
variations to be sold by special arrangement between
buyer and seller.
Twist ALUMINUM AIRPLANE CASTINGS
Shall consist of clean aluminum castings from airplanes
and to be free from iron, dirt, brass, bushings,
and non-metallic items. Oil and grease not to total
more than 2%.
Twitch FLOATED FRAGMENTIZER ALUMINUM SCRAP (from Automobile Shredders)
Derived from wet or dry media separation device, the
material must be dry and not contain more than 1%
maximum free zinc, 1% maximum free magnesium,
and 1% maximum of analytical iron. Not to contain
more than a total 2% maximum of non-metallics, of
which no more than 1% shall be rubber and plastics.
To be free of excessively oxidized material, air bag
canisters, or any sealed or pressurized items. Any
variation to be sold by special arrangement between
buyer and seller.
Tweak FRAGMENTIZER ALUMINUM SCRAP (from Automobile Shredders)
Derived from either mechanical or hand separation,
the material must be dry and not contain more than
4% maximum free zinc, 1% maximum free magnesium,
and 1.5% maximum of analytical iron. Not
to contain more than a total 5% maximum of nonmetallics,
of which no more than 1% shall be rubber
and plastics. To be free of excessively oxidized material,
air bag canisters, or any sealed or pressurized
items. Any variation to be sold by special arrangement
between buyer and seller.
Twire BURNT FRAGMENTIZER ALUMINUM SCRAP (from Automobile Shredders)
Incinerated or burned material must be dry and not
contain more than X% (% to be agreed upon by buyer
and seller) ash from incineration, 4% maximum
free zinc, 1% maximum free magnesium, and 1.5%
maximum of analytical iron. Not to contain more
than a total 5% maximum of non-metallics, of which
no more than 1% shall be rubber and plastics. To be
free of excessively oxidized material, air bag canisters,
or any sealed pressurized items. Any variation
and seller.